Using both the infrared (PIR) technology to detect body heat and the human motion sensor, the CSRL5010 Wireless Motion Sensor Light turns on or off based on occupancy and ambient light levels. Installation is simple, you can either instantly stick it in place or screw it for a more rugged fix. Once setup it provides reliable gentle light whenever you come near. The low power consumption led provides soft illumination and ensures long battery life.

 Specifications:

Item Type: Night Light
Model No.: CSRL5010
Power:0.5W
Material: ABS
IP Rating: IP44
Light Source:1PC Super White LED (10 lumens)
Sensor Mode: Motion Sense & Light Sense
Sensor Angle:100°
Sensitivity Distance:0-3M
Delay Time:30s
Power Source:4xAA batteries (not included)
Size: 99 x 29 x 87mm (L x W x H)

Note:  
-The double sided mounting tape is intended for indoor use only, if you are mounting outdoors, use the included screws to attach the bracket to the mounting surface.
-Please use only new alkaline or lithium AA-Cell batteries with 1.5V rating.
-Install batteries with polarity in correct position as shown.
-Do not mix old and new batteries.
-CSML5010 motion sensor light only goes on in complete darkness. Test in a dark room or drawer.
-When you put the batteries into the lamp at the first time, the light will turn on, then it will turn off automatically after 40-50 seconds.

  

Package Content:  
1XCSRL5010 motion sensor light
1xDouble sided mounting tape
1xMounting bracket
1xUser manual
2xScrews
2xAnchors